Publications
Hits 1 - 11 from 11 Results
-
SourceAuthor(s)
-
[Journal Article]
Densification behavior of pure Zn metal parts produced by selective laser melting for manufacturing biodegradable implants
In: Journal of materials processing technology, 258, 128 - 137, 2018
[DOI: 10.1016/j.jmatprotec.2018.03.007]Wen, Peng
Jauer, Lucas
Voshage, Maximilian
Chen, Yanzhe
Poprawe, Reinhart
et al. -
[Journal Article]
Mechanical properties and deformation behavior of additively manufactured lattice structures of stainless steel
In: Materials and design, 145, 205 - 217, 2018
[DOI: 10.1016/j.matdes.2018.02.062]Köhnen, Patrick
Haase, Christian
Bültmann, Jan
Ziegler, Stephan
Schleifenbaum, Johannes Henrich
et al. -
[Journal Article]
Depositing laser-generated nanoparticles on powders for additive manufacturing of oxide dispersed strengthened alloy parts via laser metal deposition
In: Japanese journal of applied physics : JJAP, 57 (4), 040310, 2018
[DOI: 10.7567/JJAP.57.040310]Streubel, René
Wilms, Markus
Doñate-Buendía, Carlos
Weisheit, Andreas
Barcikowski, Stephan
et al. -
[Journal Article]
Microstructures, tensile properties, and fracture mechanisms of Inconel 718 formed by HDR-LMD with PREP and GA powders
In: The international journal of advanced manufacturing technology, online first, 1-11, 2018
[DOI: 10.1007/s00170-018-1662-1]Zhong, Chongliang
Chen, Jing
Gasser, Andres
Sui, Shang
Schleifenbaum, Johannes -
[Journal Article]
Influence of solution heat treatment on microstructure and tensile properties of Inconel 718 formed by high-deposition-rate laser metal deposition
In: Journal of alloys and compounds : JAL, 740, 389-399, 2018
[DOI: 10.1016/j.jallcom.2017.11.004]Sui, Shang
Zhong, Chongliang
Chen, Jing
Gasser, Andres
Huang, Weidong
et al. -
[Contribution to a book, Contribution to a conference proceedings]
Alternative beam sources and machine concepts for laser powder bed fusion
In: Proceedings of the 2017 High Power Diode Lasers and Systems Conference (HDP) : co-located with Photonex 2017, Ricoh Arena, Coventry, United Kingdom, 11th and 12th October 2017 / IEEE ; organised by the Scottish Chapter of the IEEE Photonics Society ; conference sponsor: IEEE Photonics Society, 2017
[DOI: 10.1109/HPD.2017.8261078]Eibl, Florian
Tenbrock, Christian
Pichler, Tobias
Schmithusen, Tobias
Heussen, D.
et al. -
[Journal Article]
Kostenmodell für das Laserstrahlschmelzen: Kosten- und Leistungskennwerte für die additive Fertigung ermitteln und analysieren
In: wt Werkstattstechnik online, 107 (6), 432-435, 2017Schleifenbaum, Henrich
Pichler, Tobias
Hoppe, Birk -
[Journal Article]
Numerical and Experimental Study of Ti6Al4V Components Manufactured Using Powder Bed Fusion Additive Manufacturing
In: JOM : a publication of the Minerals, Metals & Materials Society (TMS), 63, 2017
[DOI: 10.1007/s11837-017-2596-z]Zielinski, Jonas
Mindt, Hans-Wilfried
Düchting, Jan
Schleifenbaum, Henrich
Megahed, Mustafa -
[Journal Article]
The Influence of the Powder Stream on High-Deposition-Rate Laser Metal Deposition with Inconel 718
In: Metals : open access journal, 7 (10), 443, 2017
[DOI: 10.3390/met7100443]Zhong, Chongliang
Pirch, Norbert
Gasser, Andres
Poprawe, Reinhart
Schleifenbaum, Johannes -
[Journal Article]
Case Studies on Local Reinforcement of Sheet Metal Components by Laser Additive Manufacturing
In: Metals : open access journal, 7 (4), 113, 2017
[DOI: 10.3390/met7040113]Bambach, Markus
Sviridov, Alexander
Weisheit, Andreas
Schleifenbaum, Henrich -
[Contribution to a book, Contribution to a conference proceedings]
Additive manufacturing: perspectives for diode lasers
In: 2015 IEEE High Power Diode Lasers and Systems Conference (HPD) : [Proceedings] - IEEE, 2015. - ISBN 978-1-4673-9177-1978-1-4673-9178-8 - doi:10.1109/HPD.2015.7439684, 2015
[DOI: 10.1109/HPD.2015.7439684]Hinke, Christian
Merkt, Simon
Eibl, Florian
Schrage, Johannes
Bremen, Sebastian